A. similar to’small size tap bolts except that a greater variety of shapes of heads are available
B. slotted for a screw driver and generally used with a nut
C. used to prevent relative motion be-tween parts
D. provided with detachable caps
E. similar to stud

Advertisement

Related Mcqs:

  1. Set screws are_________________?
    A. similar to small size tap bolts except that a greater variety of shapes of heads are available B. slotted for a screw driver and generally used with a nut C. used to prevent relative motion be-tween parts D. similar to stud E. none of the above...
  2. Ball bearing type screws are found in following application_____________________?
    A. screw jack B. aeroplane engines C. crane D. steering mechanism E. bench vice...
  3. Machine screws are________________?
    A. similar to small size tap bolts except that a greater variety of shapes of heads are available B. slotted for a screw driver and generally used with a nut C. used to prevent relative motion be-tween two parts D. similar to stud E. none of the above...
  4. Allen bolts are___________________?
    A. self locking bolts B. designed for shock load C. used in aircraft application D. provided with hexagonal depression in head E. uniform strength bolts...
  5. Resilience of a material is important, when it is subjected to________________?
    A. combined loading B. fatigue C. thermal stresses D. wear and tear E. shock loading...
  6. The notch angle of the Izod impact test specimen is________________?
    A. 10° B. 20° C. 30° D. 45° E. 60°....
  7. In nitrated parts, the origins of the fatigue cracks will occur at__________________?
    A. surface B. just below the surface C. within the core D. could occur anywhere E. none of the above...
  8. Fibrous fracture occurs in_____________?
    A. ductile material B. brittle material C. elastic material D. hard material E. all of the above...
  9. The shock absorbing capacity of a bolt can be increased by___________________?
    A. tightening it properly B. increasing shank diameter C. grinding the shank D. using washer E. making shank diameter equal to core diameter of thread...
  10. A key capable of tilting in a recess milled out in a shaft is known as______________________?
    A. wood-ruff key B. feather key C. flat saddle key D. gib head key E. hollow saddle key...
Advertisement